User Guide v6.9.0GOV
–
© Parrot, January 20, 2023
71
G
IMBAL TILT AND ZOOM CONTROLS
Two of
ANAFI USA
’s main assets are its gimbal tilt control capabilities (
180°, nadir to
zenith), and its 32x zoom. This section presents these features and the way to activate
them.
Gimbal tilt control
ANAFI USA
’s
gimbal tilt control is activated through the left trigger of
Skycontroller USA
. It is available in all video and photo modes, and in all manual
piloting modes.
-
To aim the gimbal toward the ground, push the tilt control trigger down.
-
To aim the gimbal toward the sky, pull the tilt control trigger up.
-
To reset the gimbal tilt to a horizontal position, press the optics reset button
on the left of
Skycontroller USA
(this action also resets the zoom factor of the
lens to 1x)
.
Zoom control
ANAFI USA
’s
zoom control is activated through the right trigger of
Skycontroller USA
. It is available in all video modes, and in
JPEG RECT
photo mode
(with an impact on the final resolution of your pictures). WIDE photo modes imply the
use and rendering of all 21MP delivered by
ANAFI USA
’s
CMOS sensors. Zoom is
deactivated in both WIDE photo modes.
-
To zoom in on a subject, push the zoom trigger down.
-
To zoom out, pull the zoom trigger up.
-
Pressing the optics reset button on the left of
Parrot Skycontroller USA
instantly resets the zoom factor of the lens to 1x
(this action also resets the
gimbal tilt to a horizontal position)
.
The HUD of
FreeFlight 6
presents precise, decimal-by-decimal zoom information at
all times, in the middle of the left side of the screen, as shown on the following screen
captures.
Содержание ANAFI USA GOV
