Parrot ANAFI USA GOV, Руководство пользователя

Страница: 39 / 126

User Guide v6.9.0GOV – © Parrot, January 20, 2023
39
S
MART
L
I
P
O
B
ATTERY
One smart battery comes preinstalled on the ANAFI USA. You can charge the smart
battery whether it is installed on
ANAFI USA,
or not. If you remove the battery, you
must reinstall it in the same orientation. Ensure that you do not install the battery
upside down as it can expose the battery and the drone to irreparable electrical
damage.
Important : The LEDs and power button face up in the correct orientation.
Important : Do not apply pressure or touch the drone’s gimbal when you handle
ANAFI USA
.
Note : LiPo batteries gradually lose capacity after 300 charge/discharge cycles.
Battery removal
To remove the smart battery from the drone, unfold the rear arms of
ANAFI USA
. Set
the drone on a flat and even surface and press the push-button which connects the
battery to the body of the drone with your thumb. Gently slide your thumb and the
battery toward the back of
ANAFI USA
. When the hook of the push-button is
disengaged from the body of the drone, lift the battery away from
ANAFI USA
.
Battery installation
To install the smart battery on the drone, unfold the rear arms of
ANAFI USA
. Set the
drone on a flat and even surface an d position the battery’s three hooks into the
drone’s corresponding slots. Place your middle finger on the Parrot logo of
ANAFI USA
and your thumb on the back of the smart battery. Squeeze your fingers
together until you feel and hear the battery clicking into the body of the drone.
Battery charging
To charge
ANAFI USA
’s smart LiPo battery , use the enclosed USB-A to USB-C cable
to plug the battery to a power source. This convenient cable enables you to charge
your battery from:
•
the enclosed charger.
•
a tabletop or laptop computer’s USB -A port.
•
a power bank’s USB -A port.
Indicative full charging times depending on power sources are as follows (at 20°C):
-
enclosed charger: between 200 and 240 minutes;
-
a computer’s between 300 and 350 minutes.
or power bank’s USB -A port:
ANAFI USA
’s smart battery can also be recharged through a Power Delivery adapter
or charger (USB-PD standard), using a USB-C to USB-C cable (not included in the