8
Replacing the Oven Lamps
WARNING: Ensure that the appliance is turned off before replacing the oven lamp/s
to avoid the possibility of electric shock.
Unscrew the glass cover of the lamp-holder as shown below.
Remove the lamp and replace with a lamp resistant to high
temperatures (300°C) with the following characteristics:
Voltage 220 - 240V, Wattage: 25W.
Screw to glass cover back in place.
Disposal
Parmco has a commitment to being environmentally responsible. To avoid potential
negative impacts on the environment, please ensure that this appliance is disposed of
correctly. This product must not be treated as household waste. Instead it should be
handed over to an appropriate collection point for recycling of electrical, electronic and
steel components. Disposal should always be carried out in an environmentally
appropriate manner. For more detailed information about treatment, recovery and
recycling of this product, please contact your local City Council office.
IMPORTANT NOTE
It is the law in New Zealand that this appliance must be installed by authorised persons. The installation
must comply with all the appropriate New Zealand Standards and Regulatory Requirements, with
particular reference to the New Zealand Electrical Standards.
Any attempt to install this or any other Parmco product without an authorised person could result in
damage to the product and possible health hazard. Not having an authorised person install this appliance
may result in all associated warranties from Parmco Appliances being null and void.
4
