9
10. PYROLYTIC FUNCTION
The pyrolytic function allows you to select an automatic oven cavity self-cleaning mode.
During this mode, the oven is heated to approximately 450 C°. Any food residues from
roasting, grilling and baking are burnt to ash.
Rotate "K1" to select the pyrolytic function
Press
to confirm the cleaning cycle. The default time is 2 hours.
If desired, rotate "K1"to change the duration of the pyrolytic cycle. Only two set
times can be selected: 1:30 or 2:00 hours.
Note
:
If the oven door is not closed, the pyrolytic mode will not start and the display
will show “DOOR PYA”.
When the oven reaches temperatures higher than 200 C° the door will lock. To
cancel the pyrolytic function press the cancel button and the oven will reset to
normal operation, but if the temperature is higher than 300 C°, the oven door
will lock and the LED will display “COOL”. The door will unlock when the
“cooling” cycle is finished.
If the door is opened during heating, the relay for the heating will stop and the
display will show “DOOR”; the buzzer will sound continuously until the door is
closed or the cancel button is pressed.
Note
:
BEFORE STARTING THE PYROLYTIC FUNCTION
All trays and racks must be removed before starting the cleaning cycle.
Remove the chrome side rails by unscrewing the screw from the bottom of each
side, then lift up the racks and slide out. After cleaning please use a damp cloth
and wipe the internal oven cavity and inner door glass.
Reinstall the racks by reversing the process used for removing them.
