Parmco HX-2-2NF-INDUCT, Инструкция по установке и эксплуатации

Страница: 9 / 28

6
Before using your Induc � on Hob
•
Read this guide , taking special note of the ‘Safety Warnings’ sec � on.
• Remove any protec � ve fil m that may s �ll be on your Induc � on hob.
• B OOST func � on - when selected the power of the cooking zo ne increases to 1500W/2000W for
5 minutes only , before rever � ng to the previous heat se � ng.
Using the Touch Controls
•
The controls respond to touch , so you do not need to apply any pressure.
• Use the ball of your fi nger , not its � p.
•
You will hear a beep each � me a touch is registered.
• M ake sure the controls are always clean , dry , and that there are no objects ( e.g. a utensil or a
cloth ) covering them. Even a thin fil m of water may make the controls di ffi cult to operate.
Choosing the right Cookware
•
Only use cookware with a base suitable for induc � on cooking. Look
for the induc � on symbol on the packaging or on the bo � om of the
pan.
•
You can check whether your cookware is suitable by carrying out a
magnet test. M ove a magnet towards the base of the pan. If it is
a �r acted , the pan is suitable for induc � on.
•
If you do not have a magnet:
o Put some water in the pan you want to check.
o
Follow the steps under ‘To start cooking’ on page 7.
o If does not fl ash in the display and the water is hea � ng , the pan is suitable.
•
Cookware made from the following materials is
not
suitable: pure stainless steel , aluminum or
copper without a magne � c base , glass , wood , porcelain , cerami c, and earthenware.