8
Turn the element on briefly to ensure it is totally dry.
When using sponges or a moist cloth to clean the tops, remember that excess
water can damage the electric elements.
Clean hard stains using non abrasive detergents, special products that can be
found in the supermarkets, or warm vinegar.
After the element has been cleaned and dried, apply solid hotplate protector
(available in the supermarkets) or a light coat of cooking oil to the element.
Important Notice
After use, a discolouration of the stainless steel hot plate rims is to be
expected and cannot be avoided. This does not affect the operation of the
cooktop.
Failure to correctly clean and maintain these elements may result in rusting
and pitting of the elements. Damage to the elements caused by incorrect
maintenance is not covered under warranty.
Troubleshooting
Issue
Possible cause
Action
The cooktop
does not turn
on.
No power
Make sure the cooktop is connected
to the power supply and the power
switch is turned on.
Check if there is an power outage.
If you've checked everything and the
problem persists, call a qualified
electrician or Parmco's Service
Department.
The surface is
scratched
Use of improper
cookware.
Unsuitable, abrasive
cleaning products have
been used for cleaning.
Use cookware with flat, smooth base.
See "Choosing the correct cookware"
section.
Refer to the "Cleaning and
Maintenance" section.
These recommendations are guidelines only.
Do not attempt to disassemble the appliance yourself to avoid damaging the electric
cooktop and any personal injuries.