Safety Warnings
1. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons.
2. This product is intended for indoor use only.
3. Power line connection:The power cord should be connected in
compliance with the relevant New Zealand standard, to an 3×20A
omni-polar circuit breaker.
4. If the appliance is being connected directly to the mains an
Omni-polar circuit-breaker must be installed with a minimum
opening of 3mm between contacts.
5. Please use a dedicated power protection switch.
6. Do not wash the induction hotplate directly with water. Excess
water entering the hob is a hazard.
7. Never have the induction hotplate working without food or liquid
within the cooking vessel as this will affect its operational
performance and may damage the unit.
8. Do not heat unopened canned goods directly on the induction
hob as there is a danger of explosion due to heat expansion.
9. After being used for a long time, the corresponding heating zone
of the induction hotplate will be hot. Do not touch the ceramic
surface to avoid personal injury.
10. We suggest that you should periodically check that there are no
objects (glass, paper, etc) that could obstruct the ventilation inlets
under your induction hotplate.
