19
Cautions
1. The hob must be installed by qualified personnel. Never conduct the operation
by yourself.
2. The hob shall not be mounted to cooling equipment, dishwashers and rotary
dryers.
3. The wall and induced heating zone above the work surface shall withstand heat.
4. To avoid any damage, the benchtop and adhesive must be resistant to heat.
5. A steam cleaner is not to be used.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker. The method of connection is shown below.
1. If the cable is damaged or needs replacing, the operation must be carried out by
a qualified technician with dedicated tools to avoid any accidents.
2. If the appliance is being connected directly to the mains, an omnipolar circuit
breaker must be installed with a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical connection has been made
and that it is compliant with safety regulations.
