ܱ±® ®»³±ª¿´
In order to obtain easier access to the oven chamber for cleaning, it is possible to
remove the door.
To do this, tilt the safety catch part of the hinge upwards. Close the door lightly, lift and pull it
out towards you. In order to fit the door back on to the cooker, do the inverse. When fitting,
ensure that the notch of the hinge is correctly placed on the protrusion of the hinge holder.
After the door is fitted to the oven, the safety catch should be carefully lowered down again. If
the safety catch is not set it may cause damage to the hinge when closing the door.
Tilting the hinge safety catches
Door removal
Removal of the internal panel
λ³±ª¿´ ±º ¬¸» ·²¬»®²¿´ ¹´¿ °¿²»´
Unscrew and unfasten the plastic latch that is in the corner at the top of the door. Next take out
the glass from the second blocking mechanism and remove. After cleaning, insert and block
the glass panel, and screw in the blocking mechanism.
Install door
ÝÔÛßÒ×ÒÙ ßÒÜ Óß×ÒÌÛÒßÒÝÛ
22
