background image

2

EN

WARNING:

 Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product 

correctly can result in damage to the product, personal property and cause serious injury. 

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this 
Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without 
direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, 
Inc. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, 
prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:

NOTICE:

 Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.

CAUTION:

 Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.

WARNING:

 Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high prob-

ability of superficial injury. 

Additional Safety Precautions and Warnings

Age Recommendation: Not for children under 14 years.

 This is not a toy. 

As the user of this product, you are solely responsible for operating it in a manner that does not endanger yourself and others or result in damage to the product 
or the property of others.
This model is controlled by a radio signal that is subject to interference from many sources outside your control. This interference can cause momentary loss of 
control so it is advisable to always keep a safe distance in all directions around your model, as this margin will help to avoid collisions or injury.
 Never operate your model with low transmitter batteries.
Always operate your model in open spaces away from full-size vehicles, traffic and people.
 Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.).
 Keep all chemicals, small parts and anything electrical out of the reach of children.
 Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and protected for this purpose.
 Never lick or place any portion of your model in your mouth as it could cause serious injury or even death.

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature, 
visit horizonhobby.com and click on the support tab for this product.

The Battery Charger included with the Radian Pro has been designed to safely 
charge the Li-Po battery. You must read the following safety instructions and 
warnings before handling, charging or using the Li-Po battery.

CAUTION

: All instructions and warnings must be followed exactly. 

Mishandling of Li-Po batteries can result in a fire, personal injury, and/or 
property damage.

•  By handling, charging or using the included Li-Po battery you assume all 

risks associated with lithium batteries. If you do not agree with these con-
ditions, return your complete Radian Pro model in new, unused condition to 
that

•  DO NOT USE A Ni-Cd OR Ni-MH CHARGER. Failure to charge the battery 

with a compatible charger may cause fire resulting in personal injury and/
or property damage.

•  If at any time the battery begins to balloon or swell, discontinue use imme

-

diately. If charging or discharging, discontinue and disconnect. Continuing 

to use, charge or discharge a battery that is ballooning or swelling can 
result in fire.

•  Store the battery at room temperature in a dry area for best results.
•  When transporting or temporarily storing the battery the temperature range 

should be from 40–120º F. Do not store battery or model in a car or direct 
sunlight. If stored in a hot car, the battery can be damaged or even catch 
fire.

•  Li-Po cells should not be discharged to below 3V each under load.
•  Do not cover warning labels with hook and loop strips.

Never leave 

charging Batteries

unattended.

Always charge 

Batteries away from

flammable materials.

Never charge 

Batteries outside safe 

temperature range.

Never charge

Batteries outside

recommended levels.

Store 

Batteries

safely.

Never charge

damaged Batteries.

Battery Warnings

Meaning of Special Language

Содержание Radian Pro
















Отзывы: