Parkside ZKGS 2100, Инструкции по эксплуатации и безопасности

Страница: 9 / 24

GB
9
1. Introduction
Important!
When using equipment, a few safety
precautions must be observed to avoid injuries
and damage. Please read the complete
operating manual with due care. Keep this
manual in a safe place, so that the information
is available at all times. If you give the
equipment to any other person, give them
these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these
instructions and the safety information.
2. Safety information
CAUTION!
Read all safety regulations and
instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
2.1 Explanation of the symbols on the
machine
Read the directions for use!
Important! Risk of injury. Do not touch
the saw blade when it is moving!
Wear a dust mask if dust forms.
Wear ear protection!
Wear eye protection!
Wear safety gloves
2.2 General safety instructions for electrical
equipment
Important! When using electrical tools, the
following safety measures are to be taken
to prevent electric shocks, injuries and risk
of fire. Read these instructions carefully
before using this equipment.
1. Keep work area clean
– Cluttered areas and benches invite
injuries.
2. Consider work area environment
– Don't expose power tools to rain. Don't
use power tools in damp or wet locations.
Keep work area well lit. Don't use power
tools in presence of flammable liquids or
gases.
3. Guard against electric shock
– Prevent body contact with grounded
surfaces (e.g. pipes, radiators, ranges
refrigeratiors).
4. Keep children away
– Do not let visitors contact tool or
extension cord. All visitors should be kept
away from work area.
5. Store the equipment safely and securely
– Unused equipment must be stored in a
dry, locked room, out of the reach of
children.
6. Don't force tool
– It will do the job better and safer at the
rate for which it was intended.
7. Use right tool
– Don't force small tools or attachments to
do the job of heavy duty tool. Don't use
tools for purposes not intended: for
example, don't use circular saw for cutt- ing
tree limbs or logs.
8. Dress properly
– Do not wear loose clothing or jewelry.
They can be caught in moving parts.
Rubber gloves and nonskid footwear are
recommended when working outdoors.
Wear protective nair covering to contain
long hair.
9. Use safety glasses
– Also use face or dust mask if cutting
operation is dusty.
Anleitung_ZKGS_2100_4300688:_ 25.11.2008 8:30 Uhr Seite 9