PUD 30 A1
GB
│
MT
│
17
■
Face joints
♦
Attach the adjustable stop to the underside of the product and
screw in the locking screw loosely (see Fig. D).
♦
Place the drill bush onto a dowel on wooden workpiece .
Push the adjustable stop against wooden workpiece , tighten the
locking screw and remove the product (see Fig. E). This determines
the correct spacing for the drill holes in wooden workpiece .
♦
Clamp both wooden workpieces flush together, e.g. on a work-
bench (see Fig. G).
♦
Leave the drilling depth as for wooden workpiece .
♦
Slide the product with the matching guide groove to the drill bush
over the dowel until it stops (see Fig. G).
♦
Insert the drill into the drill bush and drill a hole (see Fig. G).
♦
Fill the drill holes with wood glue.
♦
Join the two wooden workpieces.
IB_364186_PUD30A1_LB5.indb 17
11.03.2021 10:45:11
