PUD 30 A1
■
18
│
GB
│
MT
T-joints
♦
Remove the stop if necessary.
♦
Draw a line on wooden workpiece where you want to attach
wooden workpiece (see Fig. H).
♦
Clamp wooden workpiece at a distance of 35 mm to the marked
line parallel on wooden workpiece (see Fig. H).
♦
Readjust the drilling depth to minus 6 mm of the thickness of
wooden workpiece plus 26 mm for the thickness of the product
itself.
♦
Slide the product with the matching guide groove to the drill
bush over the dowel flush with wooden workpiece (see Fig. H).
♦
Insert the drill into the drill bush and drill a hole (see Fig. H).
♦
Fill the drill holes with wood glue.
♦
Join the two wooden workpieces.
Maintenance and storage
ATTENTION! PROPERTY DAMAGE!
►
Do not use aggressive or abrasive cleaning agents, as they can
damage the surfaces of the product.
♦
Use a soft dry brush to remove the sawdust from the product.
♦
You can also clean the product using a dry cloth.
♦
Store the product in a clean, dry location away from direct
sunlight.
IB_364186_PUD30A1_LB5.indb 18
11.03.2021 10:45:11
