Parkside PTHSA 20-Li A2, Перевод оригинальной инструкции

Страница: 6 / 80

6
IE NI GB
Sound power level (L
WA
)
measured .... 86.4 dB(A); K
WA
= 2.26 dB
guaranteed ........................... 92 dB(A)
Vibration (a
h
)
at the handle ..1.804 m/s 2 ; K = 1,5 m/s 2
at the handle
with padding .. 2.113 m/s
2 ; K = 1,5 m/s 2
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning
: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra
-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).
Attention! An up-to-date list of
battery compatibility can be
found at: www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may be charged with
the following chargers:
PLG 20 A1, PLG 20 A3, PDSLG 20 A1.
Notes on Safety
This section deals with the basic safety
regulations to be observed when working
with the electric hedge trimmer.
Symbols and icons
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
Symbols on the Equipment
Caution!
Read through the instruction manual
carefully.
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face pro-
tection, ear protection, safety hel-
met, cut-protection working clothes.
Wear cut-resistant gloves.