Parkside PTBS 520 A1, Перевод оригинальной инструкции

Страница: 5 / 34

PTBS 520 A1 ■ 2
│ GB │ IE │ NI │ CY
DRYWALL SCREWDRIVER
PTBS 520 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The appliance is intended for rational, simple and
fast screwing in and unscrewing of drilling, drywall
and wood screws.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
Features
Belt clip
Locking button
ON/OFF switch
Speed preselection
Rotation direction switch
Tool holder
Screw (for adjusting the screw length)
Screw (for adjusting the screw depth)
Magazine attachment
Screw bit 150 mm (PH2)
Screw bit 25 mm (PH2)
Bit adapter
Depth stop sleeve
Adjusting ring
Lower belt guide
Screw belt
Upper belt guide
Screw stop
Package contents
1 drywall screwdriver PTBS 520 A1
1 magazine attachment
1 depth stop sleeve
2 screw belts (each with 50 screws 3.5 x 25 mm)
2 screw bits (25 mm/150 mm)
1 bit adapter
1 set of operating instructions
Technical data
Drywall screwdriver:
PTBS 520 A1
Rated voltage: 230 V ~, 50 Hz
(AC)
Rated power
consumption:
520 W
Rated no-load speed: n
0
0–4500 rpm
Max. torque: 8 Nm
Tool holder: 1/4” hexagon socket
(6.35 mm)
Protection class: II / (double insulation)
Magazine attachment:
Screw size:
–
Screw length: 25/30/35/40/41 mm
–
Max. shaft ø: 6 mm
–
Max.
screw head Ø:
9.5 mm
Screw-in depth: 3 screw depths
(continuously variable)
Depth stop sleeve:
–
Max. screw head Ø: 9.5 mm