Parkside PSBM 1100 A1, Перевод оригинальной инструкции

Страница: 9 / 24

PSBM 1100 A1 ■ 6 │
GB
│
IE
│
NI
WARNING!
► The power tool creates an electromagnetic
field during operation . This field can, in cer-
tain circumstances, impair active or passive
medical implants . To reduce the risk of fatal
injuries, we recommend that people with
medical implants consult their doctor and the
manufacturer of the medical implant before
operating this machine .
Original accessories/auxiliary
equipment
■ Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance .
Setting up
WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance .
Additional handle
NOTE
► For safety reasons, you should only use this ap-
pliance with the additional handle attached .
♦ Loosen the strap on the additional handle
by turning it clockwise .
♦ Push the additional handle over the quick-
release chuck .
♦ Turn the additional handle to the required
position .
♦ The locking positions on the additional handle
must now be pushed over the two locking pins
on the spindle of the appliance .
♦ Turn the additional handle anticlockwise
again to tighten it .
NOTE
► Move the additional handle into the
various locking positions depending on your
working position . Undo and lock the additional
handle as described previously .
Depth stop
♦ Push the toggle button for the depth stop
and keep it pushed in .
♦ Insert the depth stop into the additional
handle .
♦ Make sure that the teeth on the depth stop
point upwards and downwards .
♦ Pull the depth stop out until the distance
between the tip of the drill and the tip of the
depth stop corresponds with the required drilling
depth .
♦ Release the toggle button for the depth stop
to lock the depth stop .
Changing tools
The appliance has a fully automatic spindle lock .
♦ When the motor is stopped, the power train
locks so that the quick-release chuck can be
opened by turning it towards
RELEASE
.
♦ Insert the desired tool into the quick-release
chuck .
♦ Turn the quick-release chuck towards
GRIP to tighten the tool .
♦ The spindle lock is automatically released when
the motor starts (ON/OFF switch pressed) .
Attaching the dust extractor
CAUTION! RISK OF FIRE! Do not
work on metallic materials while the
dust extractor is attached. Hot metal
shavings can ignite parts of the extractor.
NOTE
► Do not use the dust extractor to extract
wood or plastic shavings . They can jam the
dust extractor .
♦ Use the wing screw to attach the dust ex-
tractor to the additional handle (cf . Fig . A) .
♦ It is best to use a workshop extractor .
Connect the extractor hose to the dust extraction
adapter .