Parkside PNTS 1300 C3, Перевод оригинального руководства по эксплуатации

Страница: 36 / 44

36
GB
Trouble shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage is not present
Check plug socket, cable, line,
plug and fuse, where appropri-
ate, repair through electrical
specialist
Defective on/off switch
( 3)
Repair through customer service
Worn carbon brushes
Defective motor
Low or lack of suction
Hose system ( 13/14) or
jets ( 18/19) blocked
Remove obstructions and block-
ages
Suction pipe ( 12) assem-
bled incorrectly
Assemble suction pipe correctly
Container ( 6) open Close container
Container ( 6) full Empty container
Filter ( 15/16/17) full or
clogged
Empty, clean or replace filter
Float in filter basket ( 21)
incorrectly positioned (e.g.
due to jerky movements)
Switch off the equipment so the
ball drops then switch on again
Float in the filter basket
( 21) faulty
Repair by Customer Care
Float does not switch
the appliance off
Float in the filter basket
( 21) does not move
Release float
Float in the filter basket
( 21) faulty
Repair by Customer Care
Dust or dirt is blow
out of the device
Filter ( 15/16/17) is not
or not correctly assembled
Use missing filters or check the
correct position of the filter