Parkside PMRA 20-Li B2, Перевод оригинальной инструкции, Страница: 60 / 388

GB MT
60
Low battery voltage
The charge level of the battery does not meet the minimum
requirements at the start of work:
70 % for automatic mowing
30 % for fixed point mowing (spot mode)
Place the lawn mower in the charging station
or to wait for the charging process to finish
or lawn mower returns to the charging station independently
Low battery voltage,
charge to start
Low battery, return to
charging station
Unexpected charging
error
Check cause on site, if necessary check correct contact
between unit and charging station. Restart the charging pro-
cess by restarting the device and placing it in the charging
station again
Charging current too
low
Check power supply
No signal from
boundary line
Check correct installation of the boundary line and correct if
necessary,
Place the lawn mower inside the boundary and restart it
No signal, please set
up the boundary line
first
Loop signal lost
Mower locked!
Waiting time...
Wait until the currently running process is completed
Wrong PIN, please try
again.
Enter the PIN again
Please place within
the boundary and try
again
Place the lawn mower inside the boundary and restart it
Mower outside
Please reboot to start
the firmware update
Restart lawn mower
Work interrupted,
please try again
Rain sensor activated
Rain sensor is activated
Mower in the station Mower in the station
Mower is not in the
station Mower is not in the station, if necessary place the mower in
the station
Press the start button
to start
Press the START button (3)