Parkside PLS 48 C1, Оригинальная инструкция

Страница: 8 / 100

PLS 48 C1
GB
│
CY
│
5 ■
■
To avoid potential risks, damaged mains cables
should be replaced by the manufacturer, their
customer service department or a similarly
qualified person.
CAUTION - ELECTRIC SHOCK HAZARD!
Do not use the soldering station if the handle,
the mains cable or the plug are damaged.
Never open the appliance!
Remaining risks
■ RISK OF BURNS! Do not touch the heated soldering tip or the
molten solder. There is a risk of being burnt. Always allow the
appliance to cool down completely before changing components,
cleaning or checking it.
■ After work, allow the soldering iron to cool down in the air only.
Do not attempt to quench it with water.
■ CAUTION! RISK OF FIRE! Use only the special multi-functional
holder or another fireproof surface when putting down the solder-
ing iron.
■ During breaks in work, the soldering iron must be placed in the
multi-functional holder.
■ Keep the appliance away from flammable material.
■ Never leave a switched-on appliance unsupervised.
■ CAUTION! RISK OF INJURY! Keep your hands away from the
heated workpiece. The heat can be emitted through the workpiece.
■ Avoid contact between the hot soldering tip and the plastic parts
of the multi-functional holder. Otherwise, the appliance might be
damaged.