16 GB
Working without the automatic
levelling system
Put the LOCK switch
4
into the position .
Press and hold the ring-button
1
on the top of the product until
the product release two laser lines from the laser beam opening
6
that are not levelled. Operation without automatic levelling
will always be indicated via the red LED indicator
2
.
Press and hold the ring-button
1
on top again until the product
switch off two laser lines from the laser beam opening at this mode.
Practical guidance
Always use only the middle of the laser line for markings. The
width of the line depends on the distance.
Working with the clamp
The clamp provided can be used to attach the device to various
objects.
1. Release the clamping nut
10
by rotating the clamping nut
anti-clockwise.
2. Position the clamping jaws
9
to the desired location.
3. Rotate the clamping nut
10
clockwise until fastened.
4. Place
-thread
5
of cross line laser with the -screw
7
of
the clamp and tighten with hand. Do not use excessive force as
this may damage the device.
Содержание PKLL 7 D3
Страница 3: ...5 4 6 10 8 9 7 3 1 2 ...
Страница 4: ...1 2 A A1 A2 5 3a 3a ...
