PHSSA 12 A1
■
6
│
GB
│
IE
│
NI
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the rechargeable battery from
heat, for example from continuous
exposure to sunlight, fire, water and
moisture.
There is a risk of explosion.
6. Service
a)
Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained.
Safety instructions specifically for
impact screwdrivers
■
Wear hearing protection when impact screw-
ing.
Exposure to loud noise can lead to hearing
loss.
■
Secure the workpiece!
A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
■
Hold the power tool firmly.
High torques can
occur for brief periods while tightening and
loosening screws.
■
Wait until the power tool has come to a stand-
still before putting it down.
The tool can jam,
this leading to loss of control of the appliance.
■
Hold the power tool by the insulated grip-
ping surfaces, when performing an operation
where the screw or attached tool could come
into contact with hidden wiring.
Contact be-
tween the screw or attached tool and a live wire
may cause exposed metal parts of the power
tool to become live and give the operator an
electric shock.
Safety guidelines for battery chargers
■
This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks must not be carried out by
children unless they are supervised.
■
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable for indoor use
only.
WARNING!
■
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
ATTENTION!
Hot surface.
There is a risk of burns.
Содержание PHSSA 12 A1
Страница 3: ......
Страница 15: ...PHSSA 12 A1 12 GB IE NI...
Страница 27: ...PHSSA 12 A1 24 DE AT CH...