Parkside PHS 650 A1, Перевод оригинальной инструкции

Страница: 19 / 122

19
GB
property. The manufacturer is not liable
for damages caused by unspecified use or
incorrect operation.
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt, in
order to avoid overstressing of the
machine. Damages caused by cut-
ting with blunt blades are not cov-
ered by the guarantee.
General Description
See the front fold-out page for
illustrations.
Scope of delivery
Unpack the device and check it for com-
pleteness. Dispose of the packaging mate-
rial correctly.
- Electric hedge trimmer
- Blade protection
- Instruction Manual
Overview
1 Impact protection with drill hole
for hanging up the device
2 Cutter bar
3 Hand protection
4 Loop grip with deadman switch
5 Vents
6 Release mechanism
(for turning handle)
7 On/off switch
8 Grip
9 Mains cable
10 Tension relief
11 Blade protection
12 Keyhole bore
Function Description
The electric hedge trimmer is driven by an
electronic motor. The equipment is double-
insulated for safety and does not require
earthing.
The hedge trimmer is equipped with a dou-
ble-sided safety cutter bar. When cutting,
the blades move backwards and forwards
in linear motion. The impact protection on
the tip of the cutter bar prevents unpleasant
recoils should the trimmer come into con-
tact with walls, fences and so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and briars.
Please note the following descriptions for
the function of the operating components.
Technical Data
Electric Hedge Trimmer ...........PHS 650 A1
Input voltage rating (U)
..230-240 V~, 50 Hz
Input power (power consumption)
(P)
...........................................650 W
Safety class ...................................... II
Protection category........................... IPX0
Cutting rate ............................2800 min
-1
Weight (incl. accessories)
..approx. 3.58 kg
Cutting length ................ approx. 700 mm
Blade length .................. approx. 780 mm
Blade length
(incl. impact protection)
... approx. 790 mm
Blade gap ....................... approx. 28 mm
Branch diameter ................. max. 20 mm
Sound pressure level
(L
pA
)
........................ 89.5 dB; K
pA
=3 dB
Sound power level (L
WA
)
guaranteed ............................. 100 dB
measured ..........97.8 dB; K
WA
= 2.13 dB
Vibration (a
h
) at the
handle ..............1.31 m/s 2 ; K=1.5 m/s 2
bow handle .......1.36 m/s 2 ; K=1.5 m/s 2