Parkside PDSS 16 A1, Перевод оригинальной инструкции, Страница: 12 / 192

PDSS 16 A1
GB│CY
│ 9 ■
Hazards during operation
■ Avoid contact with the rotating shaft and the accessory tool to
prevent cuts on your hands and other body parts .
■ When using the machine, the operator’s hands can be subject to
hazards such as cuts, grazing and heat . Wear suitable gloves to
protect your hands .
■ The operator and maintenance personnel must be physically
capable of handling the size, weight and power of the compressed
air tool .
■ Hold the compressed air tool correctly: be ready to counteract
any normal or sudden movements –keep both hands ready .
■ Keep proper footing and balance at all times .
■ Prevent unintentional starting . If the air supply is interrupted,
switch off the compressed air tool on the On/Off switch .
■ Use only the lubricants recommended by the manufacturer .
■ Use personal protective equipment . Always wear eye protection .
Wearing personal protective equipment such as protective gloves,
non-slip safety shoes or hearing protection, depending on the
type and use of the power tool reduces the risk of personal
injuries and it is recommended .
■ The permissible speed of the accessory tool used must be at least
as high as the maximum speed specified for the compressed air
tool . Accessories that rotate faster than the permissible rate can
break and throw pieces into the air .
■ Wear a safety helmet for overhead work .
■ The tool will run on after the compressed air tool has been
switched off .
■ Ensure that no hazard is caused by sparks created during use .
Explosive or flammable dusts can be generated when processing
certain materials . There is a risk of explosion or fire .