Parkside PDSP 1000 E6, Перевод оригинальной инструкции

Страница: 37 / 54

■ 34 │
GB
│
MT
PDSP 1000 E6
NOTE
► Please heed the safety instructions provided
by the manufacturer of the blasting medium.
■ Use only materials that are suited for use in the
compressed air sandblaster gun . Do not use
quartz sand. This can lead to a dangerous
build-up of silicosis-inducing dust.
■ Take steps to ensure that others are not incon-
venienced (dust formation).
■ Ensure that the blasting medium is collected so
that it can be disposed of in an environmentally
friendly manner.
■ Do not remove any type plates. These contain
important information for the safe operation of
the appliance.
■ If you are inexperienced with the appliance,
seek training in how to use it safely.
WARNING! TOXIC DUST!
► Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity.
CAUTION!
► Ensure that the appliance is disconnected
from the air supply when not in use, when
exchanging accessories or during repair work.
The air hose should not be under pressure.
Operation
Mount the collecting bag
for sandblasting material
■ Use a screwdriver to attach the collecting
bag to the appliance with the supplied
screw clip .
Select and fitting attachments
■ Start by selecting the appropriate attachment
for the job at hand ( , , , ).
■ Push the selected attachment firmly onto the jet
nozzle , ensuring that no air can escape from
the sides.
Filling the blasting medium container
CAUTION!
► Before you open the screw cap on the
blasting medium container , or make any
other settings, the connection to the
compressed air hose must be disconnected
and all pressure completely discharged.
■ Use only suitable blasting media for your
sandblasting work.
NOTE
► We recommend using a blasting medium
(ground blast furnace slag) with a grain size
of 0.2–0.8 mm and which has been shown
not to cause silicosis.
■ Please ensure that the blasting medium is
totally dry and not too coarse-grained.
NOTE
► The maximum grain size is 0.8 mm.
■ Open the screw cap on the blasting medium
container by turning it anticlockwise.
■ Fill the required amount of blasting medium
into the blasting medium container .
■ Ensure that you do not exceed the maximum
fill level for the container of 900 ml.
■ Afterwards, close the screw cap on the
blasting medium container by turning it
clockwise.