17
GB/CY
Starting the charging process
Connect the USB cable
7a
to the charger
7
using the USB socket.
Connect the other end of the USB cable
7a
to the micro-USB
charging socket
2
on the product.
Connect the charger
7
to a 100–240 V∼ 50 / 60 Hz power
source. The charge indicator
9
shows the charging progress. It
will light up red whilst charging. Once the battery is fully charged
it lights up green.
Completing the charging process
Disconnect the charger
7
from the power source.
Disconnect the charger
7
from the micro-USB charging socket
2
on the product.
Note:
The product cannot be used whilst charging. It is normal
for the handle to warm up slightly whilst charging.
Initial use
Adding Staples
Set the On / Off switch
8
to the “0“ position before working on
the product.
Turn the product over.
Squeeze the release button
3a
(see Fig. A).
Pull back on the pusher
3
(see Fig. A).
Add staples to the magazine
4
(see Fig. B).
After adding staples, slide the pusher
3
in again until the maga-
zine
4
is fully closed. Release the release button
3a
. It must click
and lock into place for the magazine
4
to be closed correctly.
Note:
Use the window on the fill indicator
5
to see if the maga-
zine
4
is empty.
Содержание PAT 4 C3
Страница 3: ...B 4 A 3a 3 3a 6 3 3a 9 5 4 2 8 1 7 7a ...
Страница 4: ...C 4 ...