Parkside PASA 20-Li A1, Перевод оригинальной инструкции

Страница: 24 / 198

24
GB MT
that may affect the power tool’s
operation. If damaged, have
the power tool repaired before
use.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and
clean.
Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be perfor-
med.
Use of the power tool for ope
-
rations different from those intended
could result in a hazardous situation.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease.
Slippery handles and grip
surfaces do not permit safe operation
and control over the power tool in un
-
expected situations.
5) CAREFUL HAnDLInG AnD USE
OF BATTERy DEVICES
a) Charge the batteries only in char-
gers that are recommended by
the manufacturer.
Risk of fire if a
charger that is suitable for a specific type
of battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the pur-
pose.
The use of other batteries may
result in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery
contacts may cause burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water.
If the liquid gets into eyes, seek
medical assistance. Leaking battery
fluid may cause skin irritations or burns.
e) Do not use damaged or altered
batteries.
Damaged or altered batte
-
ries can be unpredictable and lead to
fire, explosion or risk of injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for char-
ging and never charge the
battery or the battery-powered
tool outside the temperature
range stated in the operating
instructions.
Incorrect charging or
charging outside the permitted tempe
-
rature range may destroy the battery
and increase the risk of fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person
using only identical replacement
parts.
This will ensure that the safety
of the power tool is maintained.
b) never repair damaged batteries.
All battery repairs should be carried
out by the manufacturer or authorised
customer service centres only.
Safety information for
sawing back and forth
•
Hold the electric tool by the insula-
ted gripping surfaces when perfor-
ming work in which the tool insert
may come into contact with hidden
wiring.
Contact with a live wire can