Parkside PABK 60 B3, Инструкции по эксплуатации и безопасности

Страница: 18 / 39

15 GB/IE/NI
Mini spray gun initial use / Maintenance and Cleaning Initial use / Mini spray gun initial use
Switching on:
To turn on, press the trigger lever
18
and hold
it pressed down.
Switching off:
To end operation, release the trigger lever
18
.
Adjust paint jet
The device has two settings: round and broad jet.
Round jet Broad jet
Adjusting the round jet:
The round jet is suitable for areas such as small
surfaces, corners and edges.
Turn the regulator
15
in a clockwise direction.
Adjusting the broad jet:
The broad jet is suitable for larger surfaces, both
vertical and horizontal.
Turn the regulator
15
in an anticlockwise
direction .
The nozzle head can be continuously adjusted
to the correct position vertically and horizontally
by being turned towards the desired position.
Regulating the paint volume
NOTE
The front locking screw serves to restrict the adjust-
ment range of the material amount regulation
screw
14
.
Increasing the quantity of paint:
Turn the material amount regulation screw
14
in an anticlockwise direction.
Reducing the quantity of paint:
Turn the material amount regulation screw
14
in a clockwise direction.
Regulating the air quantity
NOTE
We recommend you begin with the maximum
air quantity. To do this, open the air volume
regulator to the maximum as is described
below under "Increasing air quantity".
Increasing the air quantity:
NOTE
We recommend you increase the air quantity if
the spray field is too course.
Turn the air quantity regulator
17
in a clock-
wise direction.
Reducing the air quantity:
NOTE
We recommend you decrease the air quantity
if the paint mist is too strong.
Turn the air quantity regulator
17
in a clock-
wise direction.
Maintenance and Cleaning
DANGER OF INJURY!
Before maintenance works, separate the device
from the pneumatic network.
NOTE
Thorough cleaning after every operation is
very important for safety and use. Otherwise
for example the needle becomes clogged and
the device's functioning is no longer guaranteed.
Wear suitable protective gloves when carrying
out cleaning work.
Do not use any hydrocarbon-containing
halogen solvents, such as trichloromethyl, ethyl
chloride, etc., as they undergo chemical reac-
tions with some materials of the paint spray
gun. This can lead to dangerous reactions.
285126_Airbrush-Set PABK 60 B3_content_IE.indd 15 14.06.17 16:34