28 GB
Example:
The valve is
opened at 9:00 am manually
, the opening
period is 30 minutes. A
program
with a
start time
be-
tween
9:00 am and 9:30
am
will not be undertaken
in this case.
Read / modify watering programmes
1. In the normal operation mode use the rotary control
5
to
switch between Programme 1‒6 to read the data.
2. To modify the program data, press the
SET
button
4
for
approx. 2 seconds after selecting the program in step 1.
After modifying the program data, the system will go back
to the normal operation mode.
3. To activate / deactivate the program, press the
SET
button
4
once after selecting the program in step 1.
Set the rotary control
5
to “ON” (activate) or “OFF”
(deactivate). Afterwards, press the
SET
button
4
again.
4. When the watering timer is active, the
symbol flashes in
the display.
Reset
Press the
SET
button
4
and
button
6
at the same time
for approx. 3 seconds. The LCD display will show all symbols
