GB 23
when programming. Evaporation and water consumption is
lowest early in the morning or late in the evening.
Putting the product into operation
1. Insert batteries to the item as described in the chapter
“Inserting / replacing batteries”.
2. Connect the water timer to water tap (see Fig. D).
Setting current time and day of week
1. Press
button
3
for approx. 2 seconds (not necessary if
you just insert batteries).
The
hour
display in the
“Time”
section will flash on
screen (see Fig. 1).
2. Set the time in
hours
with the rotary control
5
(For example
9 hour) and confirm with the
button
3
(see Fig. 2).
The
minute
display in the
“Time”
section will flash on
screen.
3. Set the time in minutes with the rotary control
5
(For example
30 minutes) and confirm with the
button
3
(see Fig. 3).
The
cursor
in the
“day of the week”
section will flash
on screen.
4. Set the day of the week with the rotary control
5
and
confirm with the
button
3
(see Fig. 4).
