24 GB
Remark:
In case you input a wrong data, you can always
press the (ON/OFF) button
7
to go to previous step.
Programming for automatic watering
1. Switch on the product. Press the
SET
button
4
for approx.
2 seconds.
The
program number
display flash on the
“Prog”
section will flash on screen (see Fig. 5).
2. Use the rotary button to set the
program number
(e. g.
Prog 3) and confirm by pressing the
SET
button
4
.
The
hour
display on the
“Start”
section will flash on
screen (see Fig. 6).
3. Set the
hours
for starting the watering time with the rotary
control
5
(e. g. 6 hours) and confirm with the
SET
button
4
.
The
minute
display on the
“Start”
section will flash on
screen (see Fig. 7).
4. Set the
minutes
for starting the watering time with the
rotary control
5
(e. g. 20 minutes) and confirm with the
SET
button
4
.
The
hour
display on the
“Run Time”
section will flash
on screen (see Fig. 8).
5. Set the
hour
for the watering time and confirm with the
SET
button
4
.
