Parkside 365102 2101, Перевод оригинальной инструкции

Страница: 41 / 58

PPS 200 C2 ■ 38 │
GB
│
MT
Operation
Switching on and off
Switching on
♦ Press the ON/OFF switch
0
to position "I" .
Switching off
♦ Press the ON/OFF switch
0
to position "0" .
Fitting the sanding sheet
WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance .
NOTE
► Before fitting a new sanding sheet
7
, remove
any dust and dirt from the sanding plate
6
,
8
and
9
.
► Ensure that the extraction holes on the sanding
sheet match up with those on the sander plate .
♦ Position the sanding sheet
7
flush on one side
of the sanding pad
6
,
8
and
9
.
♦ Then place the sanding sheet
7
on the sanding
pad
6
,
8
and
9
and press it firmly into
place .
Different materials require different grain sizes .
You can find out which grain is suitable for which
work in our non-binding recommendations in
"Work instructions, tips and tricks" .
Extracting dust
Wear a dust mask!
WARNING! RISK OF FIRE!
► When working with power tools that are fitted
with a dust collector
3
or can be connected
to a vacuum cleaner via the vacuum cleaner
adapter, there is a risk of fire! In unfavourable
conditions, e .g . when sparks are flying while
sanding metal or metal residues in wood,
wood dust in the dust sack (or in the vacuum
cleaner dust bag) can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time . Therefore, do
not allow the workpiece to overheat and
always empty the dust collector
3
or the
dust bag in the vacuum cleaner before taking
a break from work .
Dust extraction with dust collector
Attaching the dust collector
♦ Push the dust collector
3
onto the appliance .
Make sure that the symbol on the dust
collector
3
is aligned with the ▸ symbol on the
appliance . Turn the dust collector
3
to the
symbol to lock it in place (see detailed illustra-
tion on upper part of the fold-out page) .
Removing the dust collector
♦ Turn the symbol on the dust collector
3
to
the ▸ symbol on the appliance (see detailed
illustration on upper part of the fold-out page) .
Pull the dust collector
3
off the appliance .
NOTE
► To ensure optimum extraction, regularly empty
and shake out the dust collector
3
. To do so,
press the release button
2
to pull the rear
part of the dust collector
3
off the appliance .
Now remove the dust bag
3a
. Clean the dust
bag
3a
thoroughly by tapping it out .
► Perforated sanding sheets are required for
dust extraction .