Parkside 364705 2101, Перевод оригинальной инструкции

Страница: 7 / 41

PMB 1100 B2 GB
│
IE
│
NI
│
CY
│
3 ■
Noise emission value
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the power
tool is typically:
Sound pressure level
L
PA
= 90.7 dB (A)
Uncertainty K K
PA
= 3 dB
Sound power level L
WA
= 101.7 dB (A)
Uncertainty K K
WA
= 3 dB
Wear ear muffs!
Read the operating instructions
before use.
Total vibration value
(vector total of three directions) determined in
accordance with EN 60745:
Sawing metal
a
h,CM
= 6.94 m/s 2
Uncertainty K = 1.5 m/s 2
Sawing wood a
h,CW
= 6.25 m/s 2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
WARNING!
► Try to keep the vibration loads as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-
operated (cordless) power tool.
1. Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
IB_364705_PMB1100B2_IE_NI_CY.indb 3 07.04.2021 15:07:07