23
GB
NOTE
u
Some materials may be damaged by exposure to heat . Test on scrap
material .
u
Remove any glue residue after it has cooled down with a sharp knife .
Bonded joints can be released by heating .
u
Large areas are difficult to bond . The adhesive will harden before you have
extruded the right amount .
Switching off
Switching off the product: Press the on/off button
[
7]
. The battery status
indicator
[
8]
and the LED work light
[
9]
switch off .
During breaks in work, keep the product in standing position so that the
product is standing on its base
[
6]
.
Before storing the product: Allow the product to cool down fully .
m
WARNING!
u
The hot nozzle
[
1]
can cause damage and/or burns .
Automatic switch off
NOTE
u
The product switches itself off after approx . 10 minutes to save energy .
u
To save energy, do not switch on the product unless you plan to use it .
