22 GB
Gluing
m
WARNING!
u
If hot glue comes into contact with skin, a serious burn may occur . Run under
cold water for several minutes and seek medical attention if required .
u
Residual glue may result in dripping . Ensure that work surface is suitably
protected from dripping glue .
u
Avoid contact with the hot nozzle
[
1]
.
u
Wear heat resistant gloves when using this product .
Place the nozzle
[
1]
close to the work surface .
Pull the trigger
[
10]
slowly, until the melted material begins to flow from the
nozzle . Release the trigger to stop the glue flow .
Apply the glue in spots . For flexible materials, such as textiles, apply the glue in
zigzag lines .
Press the two workpieces to be bonded together immediately after applying
the glue . Hold for approx . 30 seconds . The glued bond is ready after approx .
5 minutes .
Insert a new glue stick
[
4]
into the feeder shaft
[
3]
, when the old glue stick is
totally drawn into the feeder shaft .
During breaks in work, keep the product in standing position so that the
product is standing on its base
[
6]
.
