Parkside 322689 1901, Инструкции по эксплуатации и безопасности

Страница: 48 / 174

47 GB/IE
m
CAUTION! RISK OF INJURY!
u
Only use accessory tools recommended
by the manufacturer . Using other
accessory tools and other accessories can
represent a risk of injury for you .
u
Only use accessory tools, which bear
information about the manufacturer, type
of binding, dimension and permitted
number of revolutions .
u
Only use accessory tools where the
printed rotational speed is at least as high
as what has been specified on the product
marking .
u
Do not use any broken, cracked, or
otherwise damaged accessories .
u
Only use flawless accessory tools .
u
Ensure that the accessory tool dimensions
match those of the product .
u
Never re-drill a locating hole which is too
small to make it larger .
u
Never use separate bushings or adaptors
in order to make wheels with a hole that is
too large fit the product .
u
Support plates or workpieces to reduce
the risk of kickback from a jammed wheel .
Large workpieces may bend under their
own weight . The workpiece must be
supported on both sides of the wheel, near
the wheel as well as at the edge .
¾
Release the locking flange 12: Press and
hold the spindle lock button 1 . Lift up
and rotate the tightening tab in a counter-
clockwise direction . Release the spindle lock
button (Fig . G) .
¾
If applicable, remove the current accessory
tool .
¾
Mount the desired accessory tool onto the
backing flange 11 (Fig . H) .
¾
Press and hold the spindle lock button 1 .
Lift up the tightening tab . Thread the locking
flange 12 in a clockwise direction . Use
the tightening tab to tighten the accessory
tool securely . Push down the tightening tab .
Release the spindle lock button .
˜
Switching on and off
m
CAUTION! RISK OF INJURY!
Always wear protective gloves when
handling or working with the product .
m
CAUTION! RISK OF INJURY!
u
Always hold the product with both hands
while working (Fig . J) .
m
CAUTION! RISK OF INJURY!
u
Keep your hands away from the accessory
tool when the product is in operation .
m
CAUTION! RISK OF INJURY!
u
After the product has been switched off,
the accessory tool continues moving for
some time . Do not touch the accessory tool
and do not attempt to brake it .