Parkside 317725, Перевод оригинальной инструкции

Страница: 5 / 24

PDSSE 550 A1 ■ 2 │
GB
ELECTRIC IMPACT WRENCH
PDSSE 550 A1
Introduction
Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .
Intended use
The appliance is designed for tightening and loos-
ening screws and nuts . Any other use which is not
expressly permitted in these operating instructions
may damage the appliance and represents a seri-
ous risk for the user .
The appliance is designed for use by adults . Young
people over 16 years of age may only use the
appliance under supervision .
The manufacturer accepts no liability for damages
caused by improper use or incorrect operation of
the appliance .
Use this appliance only as described and for the
areas of applications specified . The appliance is
not intended for commercial use . Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage attributable to misuse .
Features
Rotational direction switch
Maintenance cover for carbon brushes
ON/OFF switch
Power plug
Tool holder
Spare carbon brushes
Sockets (17/19/21/22 mm)
Package contents
1 electric impact wrench PDSSE 550 A1
4 sockets (17/19/21/22 mm)
2 replacement carbon brushes
1 carrying case
1 set of operating instructions
Technical data
Rated power
consumption:
550 W
Rated voltage: 230 V ∼ 50 Hz
(AC)
Idle speed:
n
0
3700 rpm
Max . torque: 500 Nm (anticlockwise rotation)
Max . torque: 100 Nm (clockwise rotation)
Tool holder: 1/2"
Protection class: II / (double insulation)
Noise emission value:
Noise measurement value determined in
accordance with EN 62841 .
The A-rated noise level of the power tool is
typically:
Sound pressure level: L
PA
= 91 .4 dB (A)
Uncertainty K: K
KPA
= 3 dB
Sound power level: L
WA
= 102 .4 dB (A)
Uncertainty K: K
WA
= 3 dB
Wear ear muffs!