Parkside 311192, Перевод оригинальной инструкции

Страница: 60 / 94

60
GB MT
d) Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power
tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool’s
operation.
If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed.
Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in
chargers that are recommended
by the manufacturer.
Risk of ire if a
charger that is suitable for a speciic type
of battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the pur-
pose.
The use of other batteries may
result in injuries and risk of ire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or ire.
d) If used incorrectly, liquid may leak
from the battery. Avoid contact
with this. In the event of accidental
contact, rinse off with water. If the
liquid gets into eyes, seek medical
assistance.
Leaking battery luid may
cause skin irritations or burns.
6) SERVICE
a) Have your power tool serviced
by a qualiied repair person us
-
ing only identical replacement
parts.
This will ensure that the safety
of the power tool is maintained.
Special Safety Directions for
the cordless grass & shrub
cutter
1) SPECIAL SAFETY DIRECTIONS
FOR HEDGE TRIMMERS
a) Keep all body parts away from
the blade. Do not attempt to re-
move clippings while the blade
is operating or to hold on to
material which is to be cut. Only
remove trapped clippings when
the tool is switched off.
One mo-
ment of carelessness in the usage of
the hedge trimmer can lead to severe
injury.
b) Carry the hedge trimmer at
the handle with an idle blade.
Always pull on the protective
cover during transport and stor-
age of the hedge trimmer.
Careful handling of the tool reduces
the risk of injury from the blade.