Parkside 282493, Перевод оригинальной инструкции

Страница: 21 / 89

PDSSA 20-Li A1 GB
│
IE
│
17 ■
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits,
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5. Use and handling of the cordless
electrical power tool
a) Charge a rechargeable battery unit using
only the charger recommended by the manu-
facturer.
Chargers are often designed for a
particular type of rechargeable battery unit.
There is the danger of fire if other types of
rechargeable battery units are used.
b) Only the rechargeable battery units supplied
are to be used with an electrical power tool.
The use of other rechargeable battery units may
lead to the danger of injury or fire.
c) When they are not being used, store re-
chargeable battery units away from paper-
clips, coins, keys, nails, screws or other small
metal objects that could cause the contacts
to be bridged.
Short-circuiting the contacts of
a rechargeable battery unit may result in heat
damage or fire.
d) Fluids may leak out of rechargeable battery
units if they are misused. If this happens, avoid
contact with the fluid. If contact occurs, flush
the affected area with water. Seek additional
medical help if any of the fluid gets into your
eyes.
Escaping battery fluid may cause skin
irritation or burns.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
Protect the rechargeable battery
from heat, for example from continu-
ous exposure to sunlight, fire, water
and moisture.
There is a risk of explo-
sion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the
power tool is maintained.
Safety instructions specifically for
impact screwdrivers
■
Wear hearing protection when impact screw-
ing.
Exposure to loud noise can lead to hearing
loss.
■ Secure the workpiece! A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
■ Hold the power tool firmly. High torques can
occur for brief periods while tightening and
loosening screws.
■
Wait until the power tool has come to a stand-
still before putting it down.
The tool can jam,
this leading to loss of control of the appliance.
■ Hold the power tool by the insulated gripping
surfaces when performing an operation in
which the screw or attached tool could come
into contact with hidden wiring.
Contact
between the screw or attached tool and a live
wire may cause exposed metal parts of the
power tool to become live and give the opera-
tor an electric shock.