PARKSAFEAUTOMOTIVE.COM
2
CONTENTS
-
Camera with 40cm cable to Female DC connector and RCA Female connector
-
1m DC power cable with Male DC connector
-
6m Male to Male RCA extension cable
-
Instructions
INSTALLATION
1.
Connect the Black wire to a suitable ground and the Red wire to a s12V
supply.
2.
If the camera is to be used in the rear of the vehicle, the Red wire should be connected
to the reversing light circuit or an interface which provides a reverse signal.
3.
Select a suitable location for the camera and ensure that the area is free from all cables,
fuel & oil. Whenever possible, avoid locations that are subject to road dirt & water spray.
4.
Aim to mount the camera preferably 45-60cm from the ground and cut a suitable hole
for
the cable
.
5.
Using the supplied video cable, connect the camera to the display screen and ensure
that the image is displayed correctly.
Setting functions
Parking lines:
Green Uncut = Parking lines ON
Green Cut = Parking lines Off
Mirror function:
White Cut = Front facing
White Uncut = Rear facing
