Parksafe FHD 360, Руководство по эксплуатации

Страница: 15 / 32

www.parksafegroup.com
12
Display
：
Display mode setting interface.
Network
：
Network setting interface.
Radar:
Radar setting interface.
Trigger
：
Trigger line setting interface (In 3D mode).
1)
Basic Setup
：
Basic setup interface, as shown below:
➢ AV
：
System setting, NTSC / PAL system selectable.
➢ Display Icon
Main interface icon hiding function (excluding the direction icon), when set to ON, the main
interface icon is displayed, when it is set to OFF, the main interface icon is hidden.
➢
Speed WakeUp
：
Low-speed wake-up settings. When set to ON, when the GPS speed value is higher than
the set speed threshold, the display will enter the standby state after the seconds set by Standby; when set to
OFF, whether the system is in standby is not controlled by GPS.
➢
Standby Delay
：
Standby setting, 3s / custom time (3-30s) / OFF selectable. When the standby is turned on,
the system will enter the standby mode at the set time when there is no remote control operation and external
triggering.
➢
Standby Setting
：
Standby display settings, AHD standby / CVBS standby / both of them standby selectable
➢
Language
：
Language settings. English, Chinese, French, German, and Dutch can be set. (This function is
temporarily unavailable).