7
Removing Internal Components
All internal components must be removed prior to fitting the stove. This will make handling the stove easier; allow
access to fixings and the flue outlet; as well as protect the internal components from damage during the
installation process.
1.
2.
3.
4.
5.
6.
Open the door(s) and remove the ashpan.
Remove the fuel retainer by lifting
upwards of its supports and remove from
firebox.
Remove the fuel retainer support (front
plate) by lifting the fuel retainer support
clear from its locating slots. Then remove.
Remove the bricks by sliding forward so
they are clear of their supports and tilting
the bottom edge into the fire box.
Remove the grate bars by lifting the front
up off the cam bar and sliding forward off
the rear grate support and lifting out of
the firebox. Repeat with remaining grate
bars.
Remove cam bar by removing the two M6
x 50mm screws from the cam bar cover.
Содержание CHEVIN 20DB CVWCHI08FM
Страница 2: ...2 STOVE MODELS CHEVIN 20DB CVWSCHI08FM CVWCHI08FM CVWSCHI08DBFM ...
Страница 24: ...24 Spares Information SINGLE DOOR DOUBLE DOORS LEFT HAND RIGHT HAND ...
Страница 25: ...25 Body Assembly Spares ...
Страница 27: ...27 Service Records ...