Parkray ASPECT 14, Инструкция по эксплуатации

Страница: 21 / 38

21
Please Note
Your Building Insurance Company may require you to inform them of this new installation and that the work has
been carried out correctly. Please check your policy to ensure that it is still valid when this installation is complete.
Using The Appliance For The First Time
When being heated up for the first time, smells and fumes are often produced. This is a normal chemical process
that allows the specialist heat resistant paint to cure and harden.
Please arrange for good ventilation of the room. Open windows and doors and if necessary, use a ventilator for fast
interchange of air. Heat up to operation temperature for at least one hour. If maximum temperature is not
achieved after heating up, release of odour may appear later.
Aerosols
Do not use an aerosol spray on or near the stove when it is alight.
Air Controls
This stove has been designed to burn far more efficiently than a traditional stove if used correctly, with the obvious
notable feature of CLEAN GLASS.
It is essential that the stove has an adequate air supply for combustion and ventilation.
A) When the air control rod is pushed in fully then both the Primary and Secondary air intakes are in the closed
position.
B) To operate pull the air control rod away from the stove. For the air control to be in the fully open position
both Primary and Secondary pull the air control rod away from the stove until it stops. This is necessary for
lighting the stove.
The air intake into the
stove is controlled by one
push pull air control rod.
Both Primary and
Secondary are operated
using this control rod.
SAFETY ADVICE
During the first operation it is highly likely that fumes and smells maybe produced as part of the
normal heat resistant paint curing process, much like a domestic oven. Therefore, good ventilation
during this process is of utmost importance. We recommend that pregnant women, allergic
persons and small children as well as domestic animals, especially birds, should not unnecessarily
stay in subjected areas.