Parklander MT125 Series Скачать руководство пользователя страница 3

3

en

WARNING

 

Certain components in this product and its related ac-

cessories contain chemicals known to the State of California 

to cause cancer, birth defects, or other reproductive harm. 

Wash hands after handling.

W

ARNING

 

Battery posts, terminals, and related accessories 

contain lead and lead compounds - chemicals known to the 

State of California to cause cancer, birth defects, or other 

reproductive harm. Wash hands after handling.

WARNING

The engine exhaust from this product contains chemi-

cals known to the State of California to cause cancer, birth 

defects, or other reproductive harm.

Important Safety Instructions

SAVE THESE INSTRUCTIONS 

- This manual contains 

important instructions that should be followed during the 

initial set-up, the operation, and the maintenance of the 

equipment. 

Save these original instructions for future 

reference.

 

The safety alert symbol is used to identify safety 

information about hazards that can result in personal injury. 

A signal word (DANGER, WARNING, or CAUTION) is used 

with the alert symbol to indicate the likelihood and the po-

tential severity of injury. In addition, a hazard symbol may be 

used to represent the type of hazard.

DANGER

 indicates a hazard which, if not avoided, will 

result in death or serious injury.

WARNING

 indicates a hazard which, if not avoided, 

could result in death or serious injury.

CAUTION

 indicates a hazard which, if not avoided, 

could result in minor or moderate injury.

NOTICE

 indicates a situation that 

could result in damage 

to the product.

FIRE

MOVING PARTS

SHOCK

STOP

TOXIC FUMES

KICKBACK

EXPLOSION

ON OFF

CHOKE

FUEL

HOT SURFACE

HAZARDOUS

CHEMICAL

WEAR EYE

PROTECTION

READ MANUAL

FAST

SLOW

OIL

Safety Symbols and Meanings

WARNING

 

Running engine gives off carbon monoxide, an odor

-

less, colorless, poison gas. 

Breathing carbon monoxide can cause headache, fa-

tigue, dizziness, vomiting, confusion, seizures, nausea, 

fainting or death.

• Operate equipment ONLY outdoors.

• Keep exhaust gas from entering a confined area through 

windows, doors, ventilation intakes, or other openings.

ROLL-OVER

HAZARD

AMPUTATION 

HAZARD

FUEL 

SHUT-OFF

OPERATOR SAFETY

Not 

for  

Reproduction

Содержание MT125 Series

































Отзывы: