21
en
MAINTENANCE
1. Run engine until warm.
2. Place the tractor on a level surface.
3. Stop the engine.
4. Clean oil fill and filter areas of any debris. Remove dip
-
stick and lay on clean cloth (see Figures 3 and 4).
5. Disconnect the oil drain hose (see Figure 10). Carefully
remove cap and lower hose into an approved container.
After the oil has drained, install cap tightly, then attach
the hose to the side of the engine.
6. Remove the oil filter and dispose of properly.
Changing the Engine Oil
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or death.
When Changing Oil
• If you drain the oil from the top oil fill tube, the fuel tank
must be empty or fuel can leak out and result in a fire
or explosion.
Figure 10
7. Lightly lubricate the oil filter gasket with fresh, clean oil
(see Figures 11 and 12).
8. Install the oil filter by hand until the gasket contacts the
oil filter adapter, then tighten the oil filter 1/2 to 3/4 turns.
9. Add oil (see
Check and Add Engine Oil
).
Figure 11
Figure 12
Not
for
Reproduction
Содержание MT125 Series
Страница 29: ...29 en WARRANTIES N o t f o r R e p r o d u c t i o n...
Страница 30: ...30 NOTES N o t f o r R e p r o d u c t i o n...
Страница 31: ...31 en NOTES N o t f o r R e p r o d u c t i o n...
