background image

P A R K I T 3 6 0 °   /   F O R C E   5 K   &   1 0 K   M A N U A L

5

THE FREEWHEEL KNOB

To switch gears, gently pull out on the 
Freewheeling Knob and turn it clockwise.

You’ll notice a small metal pin at the base 
of the Knob Shaft.

To switch between gears, this pin must be 
in the proper position. 

OPERATION

ALL FORCE UNITS HAVE TWO DRIVE MODES:

FREEWHEEL

Neutral.

 For moving the Unit to 

and from your application without 
power while it is NOT under load.

SWITCHING TO FREEWHEEL

REST PIN 

OUTSIDE

Starting from Engaged Mode, the 
wheels will be locked in the drive 
position. Without power, the Unit 
will only move an inch forwards or 
backwards before stopping.

Rock the unit so the wheels rest in 
between these two stop points.

Pull on the Knob and turn it 
clockwise. 

Rest the small pin on 

the outer metal, not in the pin hole.

You can now move the unit freely!

ENGAGED 

Drive.

 For connecting the Unit to 

your hitch and moving the trailer 
with battery power.

SWITCHING TO ENGAGED

PLACE PIN 

INSIDE

Ensure your unit is in position and 
ready to connect to your trailer.

Pull on the Knob and turn it 
clockwise. 

Ensure that the small 

pin fits into the slot.

Rock the unit back and forth.  
The knob will pop in with a “click”, 
engaging the unit into Drive.

You’re ready to connect to your 
hitch and move the trailer!

PULL ON THE KNOB AND 

TURN IT CLOCKWISE.

Содержание FORCE 5K














Отзывы: