1
Insert the base of the handle
into the
Handle Receiver Tube
.
Tighten the
Allen Screws
to
secure the handle.
Install the
2 Handle Spring Clips
onto the Handle for easy access
to the
Tightening Bar
. (Optional)
2
Connect the two parts of the
Handle Control Cable
.
Make sure the flat faces of both
cable heads are aligned.
Do NOT force it together.
Twist the plastic nut over the
connection to secure it.
3
If you purchased a Unit with the
optional
Battery Box:
Install it with the strap provided
and place your battery inside.
BATTERY NOT INCLUDED.
12V Group 24 Deep Cycle Battery
recommended.
ALIGN THE ARROWS AS SHOWN.
OPTIONAL:
INSTALL BATTERY BOX
4
ASSEMBLY
PLEASE FOLLOW THESE
STEPS TO ASSEMBLE YOUR
PARKIT360 FORCE UNIT.
P A R K I T 3 6 0 ° / F O R C E 5 K & 1 0 K M A N U A L
