The electronic timer
Please note that this is a 24 hour clock, for example 2.00 pm is shown
as 1400.
In the following pages we
explain how to set the controls.
Read through them a few times until
you are familiar with the procedure.
We have supplied a plastic card as
a quick reference when setting the
timer.
If the oven is switched off on the wall, or there is a loss of power, the
clock will stop and you will not be able to use the main oven. When you
first switch the electricity supply on, the timer display will flash.
To set the time of day
Turn the selector knob to manual
then turn to clock.
Set the correct time by turning
and holding the setting knob
clockwise. Adjust the time by turning
the setting knob in either direction.
Turn the selector knob back to manual.
To use the minute minder
Turn the selector knob to timer.
Turn the setting knob clockwise until
the display shows the time you
want. The bell symbol ( ) will be
showing and this will stay lit up
during the time. Our diagram shows
the timer set to 5 minutes.
If you change your mind and want to cancel the time you have set,
simply turn the setting knob anticlockwise. Then turn the selector to
manual.
S O N A T A 5 5 G L X a
21
Cookpot symbol
Selector
Setting knob
Bell symbol
The electronic timer
