Fig3
5.4 POWER SUPPLY
The GSM door opener
is designed to work with power supplies 12V~24V AC/DC.
The power supply
should be capable of supplying a constant current of no less than
1amp
.
After a final check of wiring switch
on the power. allow 20~30 seconds for the unit to boot up and
detect the network. Once successful connection has been made, the unit will sound a confirmation
tone and the status LED will begin flashing.
YOU CAN CUT THE PLUG OFF AND USE
THE WIRE TO CONNECT TO 24v SUPPLY
If you do the above ensure the black wire with long
white printed dashes only is connected to 24v +
Page 6
