Attach Antennas and Power Supply
1. Attach
RF
antenna
2. Attach
3G/4G
primary & secondary antennas
Optional – only if using cellular service
3. Attach
WLAN
antenna
Optional – only if using Wi-Fi
4. Attach
BT
antenna
Optional
5. Orient and insert
GPIO/CAN
screw terminal
Optional
6. Insert power cord into AC/DC transformer
7. Insert power supply into gateway
8. Insert power supply into 120VAC grounded
power source
Note: gateway automatically starts without pressing
ON/OFF
button, signified by long audible beep and an illuminated,
green
PWR
LED light
How to Properly Boot
and Reboot a Gateway
Note: Ungraceful shutdowns are when the gateway loses
power without notice - similar to unplugging a desktop com-
puter directly from the electrical outlet.
Boot
1. Insert pointy object into
ON/OFF
hole until long
audible beep is heard (as shown in Image 1)
2. Finished
Reboot
1. Insert pointy object into
ON/OFF
hole
(as shown in Image 1)
2. Hold pointy object there until green
PWR
LED
turns off (also will hear short audible beep)
3. Wait 5 seconds
4. Insert pointy object into
ON/OFF
hole
until long audible beep is heard
5. Finished
Insert Pointy
Object Here
Image 1
6
