background image

SD-324M / Page 15

APPENDIX F - Controller Status

DISPLAY

DESCRIPTION

CooL

Compressor running

pdn

Kelvin II Off (Pumpdown)

Off

Compressor not running 

APPENDIX G - Miscellaneous Displays

DISPLAY

DESCRIPTION

End

Press SELECT knob to exit menu

BAD

The wrong password has been entered

LocL

Shows that readings refer to current controller

CtrL

Shows which controller is displayed

ELECTRICAL

     Supply Voltage  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 20-26VAC 50/60Hz or 22-26 .6VDC; Class II input .
     Digital Inputs   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 0-5VDC Max Range, Interface to dry contact or open collector
     Analog Inputs  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4 Temperature Sensors 2Kohm (3Kohm optional)

1 Pressure Transducer  .5 - 4 .5VR

     Relay Outputs  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 100-240VAC, 3A ind/250V

22-28VDC, 250mA digital output w/ground (Not currently used)

     Digital Display   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . LED - Red, 7 segment, 4 digit
     Indicators   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . LED - Red, Power
     User Interface .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  Optical Encoder  (SELECT knob)
     Data Interface    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . RS 485, Modbus

MECHANICAL

     Operating Temperature   .  .  .  .  .  .  .  .  .  .  .  . -40

°

F to 158

°

F (-40

°

C to 70

°

C) 

     Humidity  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 0-95%RH (Non-Condensing)
     Enclosure   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . PC - Light Gray
     Wiring .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  Screw terminal
     Mounting   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . DIN Rail - EN 50 022

COMPLIANCE

      Environmental   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . RoHS

WEEE

      Electrical   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . CE

UL/CUL (Recognized per 873)
FCC (Class A, part 15)
C-tick

APPENDIX E - Technical Specifications

Содержание Sporlan 952567

























Отзывы: